02 / 09
KEY FEATURES
- Absolute-rated pleated polypropylene medium
- Graded-porosity multi-layer structure
- Defined particle-retention boundary
- High dirt-holding capacity
- Low differential-pressure growth
- All-polypropylene thermal construction
Puretratech · I-PT72KAPPPA
Absolute-Rated Pleated Polypropylene Capsule Filter — Solvents and parts cleaning and Chemicals, cosmetics and inkjet-fluid particle control
Absolute-Rated Pleated Polypropylene Capsule Filter for Solvents and parts cleaning and Chemicals, cosmetics and inkjet-fluid particle control. Its construction, retention rating and operating limits are the same as the base model PT72KAPPPA.
Application field: ISterilizing grade: No
Request a quote
View larger image01 / 10SKU / ModelI-PT72KAPPPA
MOQ12 pcs
Lead time10 days
Country of originChina
HS code8421999090
Support / warranty3 years
01 / 09
PRODUCT OVERVIEW
Absolute-Rated Pleated Polypropylene Capsule Filter for Solvents and parts cleaning and Chemicals, cosmetics and inkjet-fluid particle control. Its construction, retention rating and operating limits are the same as the base model PT72KAPPPA.
If you are considering this product for Solvents and parts cleaning and Chemicals, cosmetics and inkjet-fluid particle control, confirm process-fluid compatibility, retention rating, operating conditions and any sterilization or sanitization requirements before ordering.
The graded-porosity pleated polypropylene medium captures larger particles in open outer layers and finer solids in the absolute-rated inner layer.
The staged retention structure provides a more defined particle-retention boundary while maintaining high capacity and low differential-pressure growth.
03 / 09
APPLICATIONS
- Solvents and parts cleaning
- Chemicals, cosmetics and inkjet-fluid particle control
04 / 09
MATERIALS
| Component | Material / method |
|---|---|
| Filter membrane | Absolute-rated pleated polypropylene (PP) |
| Media support | Polypropylene (PP) |
| End caps | Polypropylene (PP) |
| Inner core | Polypropylene (PP) |
| Outer cage | Polypropylene (PP) |
05 / 09
BIOLOGICAL SAFETY
All components meet the biological-safety requirements of USP Class VI for plastics at 121 °C.
06 / 09
FOOD SAFETY COMPLIANCE
Materials of construction comply with applicable FDA regulations for food and beverage contact use, as detailed in Title 21 of the U.S. Code of Federal Regulations (21 CFR). Materials used for the filter media and hardware are suitable for food contact in accordance with EU 10/2011.
07 / 09
CAPSULE INTEGRITY
Minimum burst pressure: 123.5 psi (8.5 barg)
08 / 09
AUTOCLAVABLE & SANITIZABLE
- Autoclaving: up to 25 cycles at 125 °C for 30 minutes; alternatively, chemical sanitization in situ with commonly used sanitizing agents or hot-water sanitization at 90 °C for a limited duration determined by time and temperature.
- Do not steam sterilize in situ.
09 / 09
Product Configuration / Ordering Information
| Product number / model | Pore size | Length | Inlet | Outlet | Vent | Drain | Filling bell |
|---|---|---|---|---|---|---|---|
| I-PT72KAPPPA | 010=1.0µm | H=1.5 inch | 1T=1" TC | 1T=1" TC | S=Stäubli | S=Stäubli | B=Filling bell |
| 030=3.0µm | S=2.5 inch | MT=0.5" TC | MT=0.5" TC | H=Hose barb | H=Hose barb | ||
| 050=5.0µm | D=4 inch | M6H=3/8" multistep hose barb | 7H=1/2" hose barb | ||||
| 100=10µm | L=5 inch | 8NF=1/2" NPT-F | |||||
| 200=20µm | M6H=3/8" multiple hose barb | ||||||
| 300=30µm | |||||||
| 500=50µm |