Puretratech · P-PT69SPGAMS

Hydrophilic PES Membrane Filter Cartridges — Pharmaceutical intermediates

Name: Hydrophilic PES Membrane Filter Cartridges — Pharmaceutical intermediates
Brand: Puretratech
SKU: P-PT69SPGAMS

Hydrophilic PES Membrane Filter Cartridges for Pharmaceutical intermediates. Its construction, retention rating and operating limits are the same as the base model PT69SPGAMS.

Application field: PSterilizing grade: No

Request a quote

Puretratech P-PT69SPGAMS 69 mm Pleated Filter Cartridges — Image 1

View larger image01 / 11

SKU / ModelP-PT69SPGAMS

MOQ12 pcs

Lead time20 days

Country of originChina

HS code8421999090

Support / warranty3 years

01 / 10

PRODUCT OVERVIEW

Hydrophilic PES Membrane Filter Cartridges for Pharmaceutical intermediates. Its construction, retention rating and operating limits are the same as the base model PT69SPGAMS.

If you are considering this product for Pharmaceutical intermediates, confirm process-fluid compatibility, retention rating, operating conditions and any sterilization or sanitization requirements before ordering.

Hydrophilic PES filter cartridges adopt full polypropylene construction with high retention performance, delivering excellent chemical compatibility and superior flow capacity.

Manufactured without adhesives, binders or surfactants, each cartridge is rinsed by high-purity water to cut extractables and system downtime.

02 / 10

KEY FEATURES

High-retentive inherently hydrophilic PES membrane, no IPA pre-wetting required
All-polypropylene structure for broad chemical compatibility and high flow rate
Adhesive-free, binder-free & surfactant-free, low extractables after high-purity water rinse
Low-protein-binding, stable long-term filtration performance
Wide pore-size range: 0.04, 0.1, 0.2, 0.45, 0.65, 0.80, 1.2 μm
Minimize contamination risk and hazardous waste output

03 / 10

APPLICATIONS

Pharmaceutical intermediates

04 / 10

MATERIALS

Component	Material / method
Filter Membrane	PES
Media Support	Polypropylene
End Caps	Polypropylene
Inner Core	Polypropylene
Outer Cage	Polypropylene
Sealing Method	Thermal Bonding
O-rings	Buna, Viton (or FKM), EP, Silicone, Encapsulated Silicone, Encapsulated Viton (or FKM)

05 / 10

BIOLOGICAL SAFETY

All components meet the biological-safety requirements of USP Class VI at 121 °C for plastics.

06 / 10

FOOD SAFETY COMPLIANCE

Materials of construction comply with FDA regulations for food and beverage contact use as detailed in the US Code of Federal Regulations, Title 21 of the U.S. Code of Federal Regulations (21 CFR). Materials used to produce filter media and hardware are safe for use in contact with foodstuffs in accordance with EU 10/2011.

07 / 10

MAXIMUM OPERATING PARAMETERS

Differential pressure: forward 50 psid (3.4 barg) at 20 °C (68 °F); reverse 40 psid (2.7 barg) at 20 °C (68 °F)
Operating temperature: 82 °C (180 °F) at 10 psid (0.69 barg) in water
Recommended change-out pressure: 35 psid (2.4 barg).

08 / 10

SANITIZATION / STERILIZATION

Filtered hot water: 90 °C (194 °F), 30 minutes, multiple cycles, maximum 3 psid forward flow
Autoclave: 121 °C (250 °F), 30 minutes, multiple cycles
In-line steam: 135 °C (275 °F), 30 minutes, multiple cycles.

09 / 10

Integrity Test

Pore size	Minimum bubble point
0.05 µm	31.9 psig / 2.2 bar (IPA)
0.1 µm	24.7 psig / 1.5 bar (IPA)
0.2 µm	45 psig / 3.1 bar
0.45 µm	24 psig / 1.7 bar
0.65 µm	19 psig / 1.3 bar
0.8 µm	17 psig / 1.2 bar
1.2 µm	11.6 psig / 0.8 bar

10 / 10

Product Configuration / Ordering Information

Product number / model	Pore size	Length	Endcaps	Seal	Connection support
P-PT69SPGAMS	0X5=0.05µm	05=5 inch	7=226/fin	B=Buna-N	S=SS reinforcement
	001=0.1µm	10=10 inch	6=226/flat	E=EPDM
	002=0.2µm	20=20 inch	0=222/flat	S=Silicone
	004=0.45µm	30=30 inch	5=222/fin	V=Viton
	006=0.65µm	40=40 inch	F=DOE	TV=FEP-encapsulated Viton
	008=0.8µm		2=224/fin	TS=FEP-encapsulated Silicone
	012=1.2µm		3=224/flat
			4=222/fin (3 lugs)
			8=222/flat (3 lugs)
			x=213 internal O-ring