Puretratech · I-PT69SPHMF

Pleated Hydrophilic PTFE Membrane Filter Cartridges — Bulk Chemicals and Aqueous solutions

Name: Pleated Hydrophilic PTFE Membrane Filter Cartridges — Bulk Chemicals and Aqueous solutions
Brand: Puretratech
SKU: I-PT69SPHMF

Pleated Hydrophilic PTFE Membrane Filter Cartridges for Bulk Chemicals and Aqueous solutions. Its construction, retention rating and operating limits are the same as the base model PT69SPHMF.

Application field: ISterilizing grade: No

Request a quote

Puretratech I-PT69SPHMF 69 mm Pleated Filter Cartridges — Image 1

View larger image01 / 11

SKU / ModelI-PT69SPHMF

MOQ12 pcs

Lead time20 days

Country of originChina

HS code8421999090

Support / warranty3 years

01 / 10

PRODUCT OVERVIEW

Pleated Hydrophilic PTFE Membrane Filter Cartridges for Bulk Chemicals and Aqueous solutions. Its construction, retention rating and operating limits are the same as the base model PT69SPHMF.

If you are considering this product for Bulk Chemicals and Aqueous solutions, confirm process-fluid compatibility, retention rating, operating conditions and any sterilization or sanitization requirements before ordering.

Pleated cartridge filters adopt a single-layer hydrophilic PTFE membrane as the core filter medium.

Every cartridge completes 100% integrity testing at factory before leaving production, confirming each element meets specification and delivers consistent filtration performance on installation.

02 / 10

KEY FEATURES

Single-layer hydrophilic PTFE membrane for dependable particle retention
Pleated construction maximizes effective filtration area
100% factory integrity-tested for consistent out-of-box performance
High flow rates achieved under low-pressure-drop conditions
Excellent broad-range chemical compatibility with aggressive process fluids
Low extractables to reduce contamination risk for process liquids
Intrinsically hydrophilic, no complex pre-wetting procedures required

03 / 10

APPLICATIONS

Bulk Chemicals
Aqueous solutions

04 / 10

MATERIALS

Component	Material / method
Filter Membrane	Hydrophilic PTFE Membrane
Media Support	Polypropylene
End Caps	Polypropylene
Inner Core	Polypropylene
Outer Cage	Polypropylene
Sealing Method	Thermal Bonding
O-rings	Buna, Viton (or FKM), EP, Silicone, Encapsulated Silicone, Encapsulated Viton (or FKM)

05 / 10

BIOLOGICAL SAFETY

All components meet the biological-safety requirements of USP Class VI at 121 °C for plastics.

06 / 10

FOOD SAFETY COMPLIANCE

Materials of construction comply with FDA regulations for food and beverage contact use as detailed in the US Code of Federal Regulations, Title 21 of the U.S. Code of Federal Regulations (21 CFR). Materials used to produce filter media and hardware are safe for use in contact with foodstuffs in accordance with EU 10/2011.

07 / 10

MAXIMUM OPERATING PARAMETERS

Differential pressure: forward 50 psid (3.4 barg) at 20 °C (68 °F); reverse 40 psid (2.7 barg) at 20 °C (68 °F)
Operating temperature: 82 °C (180 °F) at 10 psid (0.69 barg) in water
Recommended change-out pressure: 35 psid (2.4 barg).

08 / 10

SANITIZATION / STERILIZATION

Filtered hot water: 90 °C (194 °F), 30 minutes, multiple cycles, maximum 3 psid forward flow
Autoclave: 121 °C (250 °F), 30 minutes, multiple cycles
In-line steam: 135 °C (275 °F), 30 minutes, multiple cycles.

09 / 10

Integrity Test

Pore size	Minimum bubble point
0.1 µm	50.8 psig / 3.5 bar
0.2 µm	40.6 psig / 2.8 bar
0.45 µm	26.1 psig / 1.8 bar
1.0 µm	8.7 psig / 0.6 bar

10 / 10

Product Configuration / Ordering Information

Product number / model	Pore size	Length	Endcaps	Seal	Connection support
I-PT69SPHMF	001=0.1µm	05=5 inch	7=226/fin	B=Buna-N	S=SS reinforcement
	002=0.2µm	10=10 inch	6=226/flat	E=EPDM
	004=0.45µm	20=20 inch	0=222/flat	S=Silicone
	006=0.65µm	30=30 inch	5=222/fin	V=Viton
	010=1.0µm	40=40 inch	F=DOE	TV=FEP-encapsulated Viton
	030=3.0µm		2=224/fin	TS=FEP-encapsulated Silicone
			3=224/flat
			4=222/fin (3 lugs)
			8=222/flat (3 lugs)
			x=213 internal O-ring