Puretratech · F-PT69SPSTMF
Double-Layered Hydrophobic PTFE Filter Cartridges for Container purge air and Aseptic packaging air. Its construction, retention rating and operating limits are the same as the base model PT69SPSTMF.
View larger image01 / 1101 / 10
Double-Layered Hydrophobic PTFE Filter Cartridges for Container purge air and Aseptic packaging air. Its construction, retention rating and operating limits are the same as the base model PT69SPSTMF.
If you are considering this product for Container purge air and Aseptic packaging air, confirm process-fluid compatibility, retention rating, operating conditions and any sterilization or sanitization requirements before ordering.
Double-layered PTFE filter cartridges are high-retention hydrophobic filters built with PTFE membranes and polypropylene components, purpose-built for critical liquid and gas sterilization applications.
Its proprietary double-layer membrane layout delivers graded filtration efficiency, greatly boosting contaminant holding capacity and extending service cycles under high-temperature gas processing scenarios.
02 / 10
03 / 10
04 / 10
| Component | Material / method |
|---|---|
| Filter Membrane | dual PTFE |
| Media Support | Polypropylene |
| End Caps | Polypropylene with embedded 316 ring |
| Inner Core | SUS 316L perforated core |
| Outer Cage | Polypropylene |
| Sealing Method | Thermal Bonding |
| O-rings | Buna, Viton (or FKM), EP, Silicone, Encapsulated Silicone, Encapsulated Viton (or FKM) |
05 / 10
All components meet the biological-safety requirements of USP Class VI at 121 °C for plastics.
06 / 10
Materials of construction comply with FDA regulations for food and beverage contact use as detailed in the US Code of Federal Regulations, Title 21 of the U.S. Code of Federal Regulations (21 CFR). Materials used to produce filter media and hardware are safe for use in contact with foodstuffs in accordance with EU 10/2011.
07 / 10
08 / 10
09 / 10
| Test parameter | Specification |
|---|---|
| Pore size | 0.2 µm |
| Bubble point | ≥ 1.4 barg (IPA/Water) |
| Water intrusion | ≤ 0.37 ml/min @ 2500 mbar/10", 22 °C |
10 / 10
| Product number / model | Pore size | Length | Endcaps | Inner core | Seal | Connection support |
|---|---|---|---|---|---|---|
| F-PT69SPSTMF | 001=0.1µm | 05=5 inch | 7=226/fin | S=Stainless steel | B=Buna-N | S=SS reinforcement |
| 002=0.2µm | 10=10 inch | 6=226/flat | P=Polypropylene | E=EPDM | ||
| 20=20 inch | 0=222/flat | S=Silicone | ||||
| 30=30 inch | 5=222/fin | V=Viton | ||||
| 40=40 inch | F=DOE | TV=FEP-encapsulated Viton | ||||
| 2=224/fin | TS=FEP-encapsulated Silicone | |||||
| 3=224/flat | ||||||
| 4=222/fin (3 lugs) | ||||||
| 8=222/flat (3 lugs) | ||||||
| x=213 internal O-ring |
