02 / 07
KEY FEATURES
- Hydrophobic PTFE membrane for dry gas service
- Water-intrusion resistance in the dry state
- 21 cm² active filtration area
- Compact in-line disc format
- Low internal hold-up volume
- Three selectable inlet/outlet connection types
Puretratech · I-PT63KPDFGAF
Hydrophobic PTFE Disc Filter — Instrument and vacuum-pump protection and Ink-reservoir and delivery-system venting
Hydrophobic PTFE Disc Filter for Instrument and vacuum-pump protection and Ink-reservoir and delivery-system venting. Its construction, retention rating and operating limits are the same as the base model PT63KPDFGAF.
Application field: ISterilizing grade: No
Request a quote
View larger image01 / 05SKU / ModelI-PT63KPDFGAF
MOQ12 pcs
Lead time8 days
Country of originChina
HS code8421999090
Support / warranty3 years
01 / 07
PRODUCT OVERVIEW
Hydrophobic PTFE Disc Filter for Instrument and vacuum-pump protection and Ink-reservoir and delivery-system venting. Its construction, retention rating and operating limits are the same as the base model PT63KPDFGAF.
If you are considering this product for Instrument and vacuum-pump protection and Ink-reservoir and delivery-system venting, confirm process-fluid compatibility, retention rating, operating conditions and any sterilization or sanitization requirements before ordering.
The naturally hydrophobic PTFE membrane provides high gas permeability when dry and resists spontaneous wetting by water below its water-intrusion limit. The low-volume polypropylene housing fits compact gas and vent lines.
Aqueous liquid filtration requires controlled pre-wetting and is not the primary duty of this product. Confirm condensate risk and compatibility of the complete polypropylene assembly before use with solvents.
03 / 07
APPLICATIONS
- Instrument and vacuum-pump protection
- Ink-reservoir and delivery-system venting
04 / 07
MATERIALS
| Component | Material / method |
|---|---|
| Filter membrane | Hydrophobic polytetrafluoroethylene (PTFE) |
| Media support | Polypropylene (PP) |
| End caps | Polypropylene (PP) |
05 / 07
BIOLOGICAL SAFETY
All components meet the biological-safety requirements of USP Class VI for plastics at 121 °C.
06 / 07
FOOD SAFETY COMPLIANCE
Materials of construction comply with applicable FDA regulations for food and beverage contact use, as detailed in Title 21 of the U.S. Code of Federal Regulations (21 CFR). Materials used for the filter media and hardware are suitable for food contact in accordance with EU 10/2011.
07 / 07
Product Configuration / Ordering Information
| Product number / model | Pore size | Inlet/Outlet |
|---|---|---|
| I-PT63KPDFGAF | 001=0.1µm | SH=1/4"–1/2" multi-stepped hose barb |
| 002=0.2µm | 2N=1/8" NPT | |
| 004=0.45µm | LL=Luer | |
| 006=0.65µm | ||
| 010=1.0µm | ||
| 030=3.0µm |