Request a quote
Home/Products/56 mm Pleated Filter Cartridges/I-PT56SPJMP

Puretratech · I-PT56SPJMP

High-Capacity Depth-Structure Polypropylene Pleated Filter Cartridge — Bulk Chemicals and Aqueous solutions

High-Capacity Depth-Structure Polypropylene Pleated Filter Cartridge for Bulk Chemicals and Aqueous solutions. Its construction, retention rating and operating limits are the same as the base model PT56SPJMP.

Application field: ISterilizing grade: No
Request a quote
Puretratech I-PT56SPJMP 56 mm Pleated Filter Cartridges — Image 1View larger image01 / 20
MODELI-PT56SPJMPFORMAT56 mm Pleated Filter Cartridges

Select the image for a closer look

SKU / ModelI-PT56SPJMP
MOQ12 pcs
Lead time10 days
Country of originChina
HS code8421999090
Support / warranty3 years

01 / 09

PRODUCT OVERVIEW

High-Capacity Depth-Structure Polypropylene Pleated Filter Cartridge for Bulk Chemicals and Aqueous solutions. Its construction, retention rating and operating limits are the same as the base model PT56SPJMP.

If you are considering this product for Bulk Chemicals and Aqueous solutions, confirm process-fluid compatibility, retention rating, operating conditions and any sterilization or sanitization requirements before ordering.

Pleated filter cartridges featuring a depth-structure polypropylene (PP) media undergo stringent quality control to provide superior pre-filtration and clarification.

Constructed with continuous micro-fibrous PP layers in a graded-density matrix, this filter creates a multi-zone filtration mechanism that captures coarse particles on the outer layer while retaining finer contaminants within the inner core.

02 / 09

KEY FEATURES

  • Pure Polypropylene Construction: Thermal-bonded polypropylene hardware and media without adhesives, binders, or surfactants ensure ultra-low extractables.
  • Broad Chemical & pH Resistance: Excellent compatibility with acids, alkalies, alcohols, and various aqueous solutions across industrial applications.
  • Nominal & Absolute Retention Options: Versatile micron ratings cater to precise liquid polishing or economical bulk pre-filtration needs.
  • Compact High-Throughput Design: Mini pleated architecture delivers maximized filtration surface area, high flow rates, and low differential pressure in small housings.

03 / 09

APPLICATIONS

  • Bulk Chemicals
  • Aqueous solutions

04 / 09

MATERIALS

ComponentMaterial / method
Filter membranePP
Media supportPolypropylene
End capsPolypropylene
Inner corePP / SUS 316L perforated core
Outer cagePolypropylene
Sealing methodThermal bonding
O-ringsBuna, Viton (or FKM), EP, Silicone, Encapsulated Silicone, Encapsulated Viton (or FKM)

05 / 09

BIOLOGICAL SAFETY

All components meet the specifications for biological safety per USP Class VI at 121 °C for plastics.

06 / 09

FOOD SAFETY COMPLIANCE

Materials of construction comply with FDA regulations for food and beverage contact use as detailed in the US Code of Federal Regulations, Title 21 of the U.S. Code of Federal Regulations (21 CFR). Materials used to produce filter media and hardware are safe for use in contact with foodstuffs in accordance with EU 10/2011.

07 / 09

MAXIMUM OPERATING PARAMETERS

  • Forward differential pressure: 50 psid (3.4 barg) at 20 °C (68 °F)
  • Reverse differential pressure: 40 psid (2.7 barg) at 20 °C (68 °F)
  • Operating temperature: 82 °C (180 °F) at 10 psid (0.69 barg) in water
  • Recommended change-out pressure: 35 psid (2.4 barg)

08 / 09

SANITIZATION / STERILIZATION

  • Filtered hot water: 90 °C (194 °F), 30 minutes, multiple cycles; maximum 3 psid forward flow
  • Autoclave: 121 °C (250 °F), 30 minutes, multiple cycles
  • In-line steam: 135 °C (275 °F), 30 minutes, multiple cycles

09 / 09

Product Configuration / Ordering Information

Product number / modelPore sizeAreaEndcapsSealConnection support
I-PT56SPJMP006=0.65µmH=500 cm²A=116 without locking grooveB=Buna-NS=Stainless-steel reinforcement
010=1.0µmS=1000 cm²B=116 with locking grooveE=EPDM
030=3.0µmD=1500 cm²C=116 with locking groove and stainless-steel ringS=Silicone
050=5.0µmL=2100 cm²D=118 double O-ringV=Viton/FKM
070=7.0µmE=118 with short lugs (Pall replacement)
100=10µmF=118 with long lugs (Sartorius replacement)
200=20µmG=1/2-inch NPT threaded
300=30µmH=123 double O-ring
500=50µmI=126 double O-ring
J=1-inch TC
K=80 mm skirt
L=1/2-inch TC
M=1/2-inch BSPT
N=123 double O-ring
O=AS116 (Pall replacement)
P=AS116 (Parker replacement)
Q=1/2-inch BSPP
R=Optiseal LAGR compatible