Request a quote
Home/Products/56 mm Pleated Filter Cartridges/F-PT56SPJFGF

Puretratech · F-PT56SPJFGF

High-Capacity Glass Fiber Junior Pleated Filter Cartridge — Process Water and Juice, Soft Drinks, Edible Oils

High-Capacity Glass Fiber Junior Pleated Filter Cartridge for Process Water and Juice, Soft Drinks, Edible Oils. Its construction, retention rating and operating limits are the same as the base model PT56SPJFGF.

Application field: FSterilizing grade: No
Request a quote
Puretratech F-PT56SPJFGF 56 mm Pleated Filter Cartridges — Image 1View larger image01 / 20
MODELF-PT56SPJFGFFORMAT56 mm Pleated Filter Cartridges

Select the image for a closer look

SKU / ModelF-PT56SPJFGF
MOQ12 pcs
Lead time10 days
Country of originChina
HS code8421999090
Support / warranty3 years

01 / 09

PRODUCT OVERVIEW

High-Capacity Glass Fiber Junior Pleated Filter Cartridge for Process Water and Juice, Soft Drinks, Edible Oils. Its construction, retention rating and operating limits are the same as the base model PT56SPJFGF.

If you are considering this product for Process Water and Juice, Soft Drinks, Edible Oils, confirm process-fluid compatibility, retention rating, operating conditions and any sterilization or sanitization requirements before ordering.

Junior pleated filter cartridges utilizing glass fiber membranes combine exceptional throughput with high-efficiency particulate containment for challenging liquid clarification.

Constructed with an ultra-fine glass fibre matrix featuring an open, three-dimensional depth structure, this filter provides a high dirt-holding capacity and superior flux rates at minimal differential pressure drops.

02 / 09

KEY FEATURES

  • Exceptional Flow Rates & Low Delta P: Open fiber network delivers superior fluid flux with minimal initial pressure drop, reducing processing time.
  • Colloidal & Deformable Particle Removal: Combined physical entrapment and adsorption mechanisms effectively retain gelatinous impurities and lipids.
  • Protects Downstream Membrane Filters: Ideal pre-filter that prevents premature fouling of downstream sterilizing-grade membrane cartridges.
  • Compact High-Density Pleating: Engineered mini architecture optimizes filtration surface area within small-scale and point-of-use housings.

03 / 09

APPLICATIONS

  • Process Water
  • Juice, Soft Drinks, Edible Oils

04 / 09

MATERIALS

ComponentMaterial / method
Filter membraneSingle- or double-layer GF
Media supportPolypropylene
End capsPolypropylene
Inner corePP / SUS 316L perforated core
Outer cagePolypropylene
Sealing methodThermal bonding
O-ringsBuna, Viton (or FKM), EP, Silicone, Encapsulated Silicone, Encapsulated Viton (or FKM)

05 / 09

BIOLOGICAL SAFETY

All components meet the specifications for biological safety per USP Class VI at 121 °C for plastics.

06 / 09

FOOD SAFETY COMPLIANCE

Materials of construction comply with FDA regulations for food and beverage contact use as detailed in the US Code of Federal Regulations, Title 21 of the U.S. Code of Federal Regulations (21 CFR). Materials used to produce filter media and hardware are safe for use in contact with foodstuffs in accordance with EU 10/2011.

07 / 09

MAXIMUM OPERATING PARAMETERS

  • Forward differential pressure: 50 psid (3.4 barg) at 20 °C (68 °F)
  • Reverse differential pressure: 40 psid (2.7 barg) at 20 °C (68 °F)
  • Operating temperature: 82 °C (180 °F) at 10 psid (0.69 barg) in water
  • Recommended change-out pressure: 35 psid (2.4 barg)

08 / 09

SANITIZATION / STERILIZATION

  • Filtered hot water: 90 °C (194 °F), 30 minutes, multiple cycles; maximum 3 psid forward flow
  • Autoclave: 121 °C (250 °F), 30 minutes, multiple cycles
  • In-line steam: 135 °C (275 °F), 30 minutes, multiple cycles

09 / 09

Product Configuration / Ordering Information

Product number / modelPore sizeAreaEndcapsSealConnection support
F-PT56SPJFGF005=0.5µmH=500 cm²A=116 without locking grooveB=Buna-NS=Stainless-steel reinforcement
010=1.0µmS=1000 cm²B=116 with locking grooveE=EPDM
030=3.0µmD=1500 cm²C=116 with locking groove and stainless-steel ringS=Silicone
050=5.0µmL=2100 cm²D=118 double O-ringV=Viton/FKM
100=10µmE=118 with short lugs (Pall replacement)
0304=3.0/0.45µmF=118 with long lugs (Sartorius replacement)
0308=3.0/0.8µmG=1/2-inch NPT threaded
H=123 double O-ring
I=126 double O-ring
J=1-inch TC
K=80 mm skirt
L=1/2-inch TC
M=1/2-inch BSPT
N=123 double O-ring
O=AS116 (Pall replacement)
P=AS116 (Parker replacement)
Q=1/2-inch BSPP
R=Optiseal LAGR compatible