Puretratech · F-PT56SPHGAJF

Hydrophilic PTFE Pleated Filter Cartridge — Bottled Water and Juice, Soft Drinks, Edible Oils

Name: Hydrophilic PTFE Pleated Filter Cartridge — Bottled Water and Juice, Soft Drinks, Edible Oils
Brand: Puretratech
SKU: F-PT56SPHGAJF

Hydrophilic PTFE Pleated Filter Cartridge for Bottled Water and Juice, Soft Drinks, Edible Oils. Its construction, retention rating and operating limits are the same as the base model PT56SPHGAJF.

Application field: FSterilizing grade: No

Request a quote

Puretratech F-PT56SPHGAJF 56 mm Pleated Filter Cartridges — Image 1

View larger image01 / 20

SKU / ModelF-PT56SPHGAJF

MOQ12 pcs

Lead time10 days

Country of originChina

HS code8421999090

Support / warranty3 years

01 / 10

PRODUCT OVERVIEW

Hydrophilic PTFE Pleated Filter Cartridge for Bottled Water and Juice, Soft Drinks, Edible Oils. Its construction, retention rating and operating limits are the same as the base model PT56SPHGAJF.

If you are considering this product for Bottled Water and Juice, Soft Drinks, Edible Oils, confirm process-fluid compatibility, retention rating, operating conditions and any sterilization or sanitization requirements before ordering.

Pleated filter cartridges constructed with a hydrophilic polytetrafluoroethylene (PTFE) membrane undergo 100% factory integrity testing to deliver exceptional particulate and bacterial retention in critical fluid processes.

Utilizing an advanced single-layer modified hydrophilic PTFE membrane, this cartridge requires no pre-wetting with organic solvents before aqueous filtration, ensuring zero surfactant leaching and instantaneous flow.

02 / 10

KEY FEATURES

Permanently Hydrophilic Membrane: Ready-to-use with aqueous fluids without solvent pre-wetting, eliminating chemical contamination and simplifying operations.
100% Individually Integrity Tested: Verified via bubble point testing to guarantee absolute structural soundness and reliable particle retention.
Universal Chemical Compatibility: Resists virtually all harsh chemicals, including concentrated acids, strong alkalies, aggressive oxidizers, and organic solvents.
Ultra-Low Extractables & High Purity: Cleanroom-manufactured with thermally bonded construction (no adhesives), ensuring compliance with USP Class VI and semiconductor purity standards.
Compact High-Surface-Area Architecture: Mini pleated design maximizes flow rates and service life within compact point-of-use or small-batch housings.

03 / 10

APPLICATIONS

Bottled Water
Juice, Soft Drinks, Edible Oils

04 / 10

MATERIALS

Component	Material / method
Filter membrane	PTFE
Media support	Polypropylene
End caps	Polypropylene
Inner core	PP / SUS 316L perforated core
Outer cage	Polypropylene
Sealing method	Thermal bonding
O-rings	Buna, Viton (or FKM), EP, Silicone, Encapsulated Silicone, Encapsulated Viton (or FKM)

05 / 10

BIOLOGICAL SAFETY

All components meet the specifications for biological safety per USP Class VI at 121 °C for plastics.

06 / 10

FOOD SAFETY COMPLIANCE

Materials of construction comply with FDA regulations for food and beverage contact use as detailed in the US Code of Federal Regulations, Title 21 of the U.S. Code of Federal Regulations (21 CFR). Materials used to produce filter media and hardware are safe for use in contact with foodstuffs in accordance with EU 10/2011.

07 / 10

MAXIMUM OPERATING PARAMETERS

Forward differential pressure: 50 psid (3.4 barg) at 20 °C (68 °F)
Reverse differential pressure: 40 psid (2.7 barg) at 20 °C (68 °F)
Operating temperature: 82 °C (180 °F) at 10 psid (0.69 barg) in water
Recommended change-out pressure: 35 psid (2.4 barg)

08 / 10

SANITIZATION / STERILIZATION

Filtered hot water: 90 °C (194 °F), 30 minutes, multiple cycles; maximum 3 psid forward flow
Autoclave: 121 °C (250 °F), 30 minutes, multiple cycles
In-line steam: 135 °C (275 °F), 30 minutes, multiple cycles

09 / 10

Integrity Test

Pore size	Minimum bubble point
0.1 µm	65.3 psig (4.5 bar)
0.2 µm	46.4 psig (3.2 bar)
0.45 µm	31.9 psig (2.2 bar)
1.0 µm	8.7 psig (0.6 bar)

10 / 10

Product Configuration / Ordering Information

Product number / model	Pore size	Area	Endcaps	Seal	Connection support
F-PT56SPHGAJF	001=0.1µm	H=500 cm²	A=116 without locking groove	B=Buna-N	S=Stainless-steel reinforcement
	002=0.2µm	S=1000 cm²	B=116 with locking groove	E=EPDM
	004=0.45µm	D=1500 cm²	C=116 with locking groove and stainless-steel ring	S=Silicone
	006=0.65µm	L=2100 cm²	D=118 double O-ring	V=Viton/FKM
	010=1.0µm		E=118 with short lugs (Pall replacement)
			F=118 with long lugs (Sartorius replacement)
			G=1/2-inch NPT threaded
			H=123 double O-ring
			I=126 double O-ring
			J=1-inch TC
			K=80 mm skirt
			L=1/2-inch TC
			M=1/2-inch BSPT
			N=123 double O-ring
			O=AS116 (Pall replacement)
			P=AS116 (Parker replacement)
			Q=1/2-inch BSPP
			R=Optiseal LAGR compatible